Professional usage:
Step 1. Clean Nails then trim nail surface as normal manicure process.
Step 2. Fully shake up the gel polish,it can make the gel polish color balanced. (Important)
Step 3. Apply Base coat first,which can make polish lasting longer,cure with UV lamp or LED lamp. (Necessary)
Step 4. Apply first layer of color gel polish directly,cure with UV lamp for 2 minutes or cure with LED lamp for 60 seconds.
Step 5. Apply second layer of color gel polish and then immediately cure with UV lamp for 2 minutes or cure with LED lamp for 60 seconds.
Step 6. Coat with no wipe topcoat,cured by UV lamp or LED lamp.

How to Remove UV Gel Nail Polish:
- Soak nails in a glass bowl filled with a small amount of pure acetone,or wrap each nail in cotton pad soaked with pure acetone for around 5 to 10 minutes.
- Product will start to become soft and you can gently file it away or slide it off using a small wooden stick.

Q&A
1. Not dry?
Excluding the factor of the dryer lamp, It is actually dry,
please don't forget to use the nail cleanser or the rubbing alcohol to wipe the sticker layer after curing the top coat.

2. Too thick?
Painting skill is the key.
Before using, stiring the gel slightly and brush the bottleneck to control it to the thinner gel,
Then, painting each thinner layer for the nails, evenly and 2-3 layers coverage can rich the color and basically achieve the advertisement effect.

3.Peel off easily?
(1)It is vital that you do not get the polish on your skin, make sure you wipe it off very well.
( **If cure it while on your skin, your gel nails will likely chip quick/peel off within a day or two**)
(2)Without using a nail file to dehydrate your nail make the nail surface dry and rough.
(4)Not enough rubbing alcohol to wipe the sticky layer, or it will be cracked.
(3)Curing too long time under the lamp that influence the nail's durability.
(5)Painting too much for the base&top coat will make the gel shrink.
(6)Different brand base coat used with our brand gel that MAY influence its compatibility.